The ADBL CLAY SPONGE is a special sponge measuring 8 x 5.5 x 2.5 cm, designed for surface cleaning, to be used instead of putty. The outer polymer layer of the sponge replaces the traditional plastic rod and is much more convenient, faster and more efficient to use. It easily removes tar, resin, asphalt and beetle residues and other strongly adhered dirt.
Application:
1. Wash the car with "two-bucket technology", then rinse, but do not let it dry,
2 Apply ADBL to the sponge or surface A quantity of SHAMPOO car shampoo that is justified by the size of the surface to be cleaned and the comfortable working conditions.
3. Start gliding the sponge across the surface with horizontal and vertical movements without much effort.
4. After each cleaned part, rinse the sponge and apply another dose of ADBL SHAMPOO shampoo and repeat the operation described in point 3 on the next part to be cleaned.
5. Continue the above until the polish feels completely smooth.
6. After treating the entire body as described above, wash the entire car again and let it dry.
7. Rinse the ADBL CLAY SPONGE sponge carefully and store it in its original packaging after drying.
Further suggestions, comments
1. If the vehicle undergoes a complex external cleaning for the first time, before using the ADBL CLAY SPONGE sponge and the ADBL SHAMPOO, first use the ADBL TAR to remove heavy dirt. AND GLUE REMOVER Tar and resin remover, as well as the ADBL VAMPIRE LIQUID or ADBL VAMPIRE LIGHT preparation.
2. Never use the ADBL CLAY SPONGE sponge with products that contain solvents (e.g. tar remover or bug remover) as they destroy the outer polymer surface of the sponge.
3. Always perform a cleaning test on a small, inconspicuous surface before cleaning a larger surface!
4. Do not expose the ADBL CLAY SPONGE sponge to temperatures higher than 40 degrees Celsius, so the surface to be cleaned must be cool. Do not use on heated surfaces or bodywork!
We recommend watching the following video before use:
Using ADBL CLAY SPONGE